Fasteners & Hardware


Disc locating pins

Disc locating pins

Disc locating pins, for replacing the worn out pins in original Lambretta front disc brake. A tread ..

$9.00

End cap hardware kit: Series 3

End cap hardware kit: Series 3

Hardware that goes through all the endcaps of a Series 3. Kit contains: 6 m4 x 20 screws ..

$9.06

Engine circlip kit

Engine circlip kit

This handy bagged kit contains the correct circlips you need to overhaul a Lambretta engine. It does..

$8.99

Exhaust nut, brass, 7mm

Exhaust nut, brass, 7mm

This special nut is suitable for use on the studs that secure a Lambretta exhaust...

$1.75

Flywheel and cylinder shroud hardware kit: Series 1-3

Flywheel and cylinder shroud hardware kit: Series 1-3

To install both the cylinder and flywheel/fan shroud on Series 1-3, DL/GP. Consists of: 7 m5 ..

$4.32

Flywheel and head cowl HEX kit

Flywheel and head cowl HEX kit

This handy kit contains the correct number of hex set screws and washers to fit your head and flywhe..

$3.99

Front axle half nut washer and side panel lever washer

Front axle half nut washer and side panel lever washer

Front axle half nut washer. This washer goes between the half nut and the back plate on drum type fr..

$0.60

Front axle locating washer

Front axle locating washer

This washer sits in your fork link to hold your axle (and hub!) in place, so it is important it is..

$2.00

Front floor rails hardware kit: Series 3

Front floor rails hardware kit: Series 3

For installing the 4 front alloy channels on Series 3 and DL. Consists of: 6 m4 x 10 screws..

$7.02

Front mudguard hardware kit: Series 3

Front mudguard hardware kit: Series 3

This kit includes: 2 m5 x 20 screws for the bottom (under aluminum channel) 2 m5 nuts for ab..

$3.78

Gear selector wishbone screw

Gear selector wishbone screw

This fastener can specifically be used for the shifter wishbone, eliminating the need for a 9mm sock..

$0.40

Grease nipple: M6 x 1

Grease nipple: M6 x 1

Grease nipple: M6 x 1 Used on some front hub backplates, fork links, fork link bolts, rear brake pe..

$0.45

Grease nipple: M8 x 1.25

Grease nipple: M8 x 1.25

Grease nipple: M8 x 1.25 Used on the front hub of some Lambrettas.  ..

$0.45

Headlight rim hardware kit: Series 2 Li/TV Series 3 Li

Headlight rim hardware kit: Series 2 Li/TV Series 3 Li

Headlight rim hardware kit: Series 2 Li/TV Series 3 Li 125 or 150. Kit consisting of: 3 m4 x 1..

$1.62

Headlight rim hardware kit: Series 3 LiS/TV/SX

Headlight rim hardware kit: Series 3 LiS/TV/SX

Kit for securing the headlight rim on all Series 3 LiS, TV and SX models. Kit consists of: 4 ..

$1.08

Headset fastener kit: S2

Headset fastener kit: S2

This handy kit contains all the fasteners you would need for any series 2 headset...

$6.50

Headset fastener kit: S3/GP

Headset fastener kit: S3/GP

This handy kit contains all the fasteners you would need for any series 3 or GP headset...

$7.50

Headset hardware kit: Series 1

Headset hardware kit: Series 1

Hardware kit for securing the headset top to the headset bottom. Kit consisting of: 2 m5 x 40..

$1.08

Headset hardware kit: Series 2-3

Headset hardware kit: Series 2-3

Hardware kit for securing the headset top to the headset bottom. Kit consisting of: 2 m5 x 45s..

$1.08

Horn grill hardware kit: Series 3

Horn grill hardware kit: Series 3

For the front horn grill on all Series 3, DL/GP. This kit consists of: 2 m4 x 10 screws ..

$0.55

Showing 61 to 80 of 97 (5 Pages)