Fasteners & Hardware


Headset hardware kit: S2

Headset hardware kit: S2

This handy kit contains all the fasteners you would need for any series 2 headset...

$15.00

Headset hardware kit: S3/GP

Headset hardware kit: S3/GP

This handy kit contains all the generic fasteners you would need for any series 3 or GP headset...

$15.00

Headset top hardware kit: Series 1

Headset top hardware kit: Series 1

Hardware kit for securing the headset top to the headset bottom. Kit consisting of: 2 m5 x 40..

$2.00

Headset top hardware kit: Series 2-3

Headset top hardware kit: Series 2-3

Hardware kit for securing the headset top to the headset bottom. Kit consisting of: 2 m5 x 45s..

$2.00

Horn grill hardware kit: Series 3

Horn grill hardware kit: Series 3

For the front horn grill on all Series 3, DL/GP. This kit consists of: 2 m4 x 10 screws ..

$1.00

Horncast hardware kit: Series 2

Horncast hardware kit: Series 2

This kit includes: 2 m5 x 14 slotted oval screws2 m5 x 16 slotted oval screws4 m5 finish wash..

$7.00

Horncast hardware kit: Series 3

Horncast hardware kit: Series 3

This kit includes: 2 m5 x 10 panhead screws for the top 2 m6 x 18 Allen screws for the h..

$7.00

Intake manifold bolt: M7 x 45mm Zinc

Intake manifold bolt: M7 x 45mm Zinc

Inlet manifold bolt: M7 x 45mm Zinc, replaces long stud. ..

$0.75

Kick start lever bolt: M7 x 40mm Zinc

Kick start lever bolt: M7 x 40mm Zinc

Kick start lever bolt: M7 x 40mm Zinc..

$0.45

Kick start lever bolt: M8 x 40mm Zinc

Kick start lever bolt: M8 x 40mm Zinc

Kick start lever bolt: M8 x 40mm Zinc..

$0.45

Lambretta thicker 6mm nut: Zinc

Lambretta thicker 6mm nut: Zinc

Lambretta thicker 6mm nut used in various place on several different models from A to J50 Special.&n..

$0.75

Lambretta thicker 8mm nut: Zinc

Lambretta thicker 8mm nut: Zinc

Lambretta thicker 8mm nut used in various place on several different models from A to J50 Special.&n..

$1.10

M4x12 cheese head screw

M4x12 cheese head screw

Used for securing throttle and gear rods inside your headset - you need four per scooter. Also used ..

$0.45

Nord-Lock lock washer: M8, for tubeless wheels

Nord-Lock lock washer: M8, for tubeless wheels

Nord-Lock lock washer: M8For tubeless wheels.Sold each!..

$1.00

Outer front plastic rail hardware kit: Series 3

Outer front plastic rail hardware kit: Series 3

For installing the two outer front plastic rails on allSeries 3. Consists of: 4 m5 nuts ..

$6.00

Rear floorboard runner strips hardware kit: Series 1-2

Rear floorboard runner strips hardware kit: Series 1-2

This kit includes are the hardware needed to secure the rear floorboard and plastic rails to all Ser..

$12.00

Rear floorboard runner strips hardware kit: Series 3

Rear floorboard runner strips hardware kit: Series 3

To install the rear floorboards and 4 rear plastic rails on all Series 3. Zinc plated. Kit contai..

$12.00

Rubber bushing set for Serveta front dampers

Rubber bushing set for Serveta front dampers

Rubber bushing set for Serveta front dampersSold set of 4...

$36.00

Seat washer kit: Series 1-3

Seat washer kit: Series 1-3

Kit is for the rear saddle seat or rear bench seat latch. These plastic washers go between the seat ..

$2.00

Side panel handle screw

Side panel handle screw

Used to secure the Lambretta side panel handle. You need two per scooter. M6x12..

$0.45

Showing 81 to 100 of 106 (6 Pages)