Search

"L" tube for throttle cable at handlebar: 150D, LUI

"L" tube for throttle cable at handlebar: 150 D, LUI..

$16.00

1st gear (51 tooth)

51 tooth first gear as used on all Series 1-2 Li125 and early Series 3 Li125. 119.0mm diameter..

$80.00

2nd gear (42 tooth)

42 tooth second gear as used on Li125, Li125 Special, GP125, SX150, Li150 Special, GP150, and GP200...

$50.00

3.5mm allen key

This is the unusually sized 3.5mm allen key you need for most original gear and clutch cable trunn..

$4.50

3mm allen key

This 3mm allen key. They do not fit the oddly sized 3.5mm trunnions that were standard on Lambrett..

$4.50

3rd gear (38 tooth)

38 tooth third gear as used on Indian GP200. 100.2mm across..

$50.00

4th gear (35 tooth)

35 tooth fourth gear as used on all Li125, Li150 Special, Li150 Pacemaker, SX150 and GP150. 92.8mm a..

$55.00

4th gear (36 tooth)

36 tooth fourth gear as used on Li125 Special, GP125 and GP200. 95.3mm across...

$55.00

5mm e-clip: black oxide

This 5mm e-clip is used to secure the tie bar to the standard gear selector shaft. If you are usin..

$0.45

6mm Nyloc nut: Zinc

6mm nut with nylon insert. Has many uses, but is specifically needed for the front damper bolts and ..

$0.45

6v 15w festoon pilot light bulb

6v 15w festoon pilot bulb for J50 or Lui50..

$3.00

6v 21w turn signal light bulb

6v 21w turn signal bulb..

$4.00

6v 25/25w headlight bulb

This is a 25/25 watt headlight bulb. It will fit any Lambretta with 6v lighting...

$10.00

6v 35/35w headlight bulb

6v 35/35w headlight bulb..

$10.00

6v 3w tail/brake festoon light bulb

6v 3w tail/brake festoon bulb for Series 1 or early Series 2 with 6v lighting.8 x 31 mm..

$4.00

7mm flat washer: Zinc

This fastener can specifically be used on Lambretta exhaust and inlet manifolds and Vespa engine c..

$0.45

7mm nut with nylon insert, Zinc

This fastener can specifically be used on the Lambretta inlet studs, on the bolts that hold on the..

$0.45

7mm nut: Zinc

This fastener can specifically be used on the Lambretta inlet studs, on the bolts that hold on the..

$0.40

7mm split lock washer: Zinc

7mm split lock washer. Zinc plated. Can be used in several places but is primarily used to secure th..

$0.45

Air filter backing plate, bolt, and wingnut kit

Air filter backing plate, bolt, and wingnut kit for all Series 2-3, DL/GP, and early Serveta La..

$18.00

Products meeting the search criteria