Search
Products meeting the search criteria
BGM magneto housing gasket, silicone
The BGM PRO silicone gaskets are made of high-quality 0.5mm thick gasket paper (like the genuine P..
$9.00
Crankcase side cover engine oil magnetic drain plug
Modern magnetic drain plug with rubber gasket for all Series 1-3, DL/GP engines. It is fitted with a..
$18.00
Crankcase side cover engine oil magnetic drain plug
Standard magnetic drain plug for all Series 1-3, DL/GP engines. It is fitted with a magnetic insert ..
$15.00
Large magneto housing/ flywheel oil seal: Nitrile 33-52-6
Large magneto/ flywheel oil seal: Nitrile 33-52-6..
$6.00
Large magneto housing/ flywheel oil seal: Viton 33-52-6
Large magneto/ flywheel oil seal: Viton 33-52-6..
$10.00
Magneto housing circlip, 52mm
Used to secure the large magneto seal into the magneto housing...
$1.00
Magneto housing gasket: 0.5mm standard thickness
This is a magneto housing gasket for any Series 1, 2 or 3 Lambretta. If you need more room for the..
$4.00
Magneto housing gasket: 1.0mm
This is a magneto housing gasket for any Series 1, 2 or 3 Lambretta. It is 1mm thick which is twice ..
$4.50
Magneto housing gasket: 1.5mm
This is a magneto housing gasket for any Series 1, 2 or 3 Lambretta. It is 1.5mm thick which is thre..
$4.50
Magneto housing oil seal: Nitrile 25-46-7 for Series 1 LI and early Series 2 LI/TV
Magneto oil seal: Nitrile 25-46-7 for Series 1 LI and early Series 2 LI/TV..
$6.00
Magneto housing oil seal: Viton 25-46-7 for Series 1 LI and early Series 2 LI/TV
Magneto oil seal: Viton 25-46-7 for Series 1 LI and early Series 2 LI/TV..
$9.00
Magneto housing sealing plate gasket
This gasket sits on the top of the magneto housing between the magneto housing and the bottom sealin..
$2.00
Magneto housing sealing plate kit
Magneto housing sealing plate for any Series 1-3 engine. Includes two backing plates. Gasket, rubber..
$20.00
Magneto housing spacer, Li/SX/TV
These fit in all magneto housings when using the standard Li, SX, TV type flywheel bearing. It fits ..
$4.00
MB end plate and magneto housing pullers: T-handle tools
MB end plate and magneto housing pullers: T-handle tools..
$25.00
MB Large magneto seal drift, Lambretta
Fitting the large oil seal into the magneto flange can be quite difficult but with this tool you ca..
$20.00
MB Small magneto seal drift, Lambretta
Fitting the small oil seal into the magneto flange can be quite difficult but with this tool you ca..
$20.00
Outer magneto housing spacer
This L shaped washer sits inside your magneto housing and holds one of the oil seals in place...
$4.00
Service: Remagnetize flywheel
Send us your tired 4 pole or 6 pole flywheel and we'll send it back to you good as new using our swe..
$35.00