Gearbox & Kickstart
39 tooth third gear as used on TV200..
$45.00
39 tooth third gear as used on later Series 3 Li125 and Series 3 LiS150. 97.2mm..
$45.00
39 tooth third gear as used on all Series 1-2 Li125 and early Series 3 Li125. 97.2mm..
$45.00
39 tooth third gear as used on GP125, 150, and 200. 100.1-100.4mm..
$45.00
32 tooth fourth gear as used on all TV200..
$55.00
33 tooth fourth gear as used on all TV175, SX200, and Jet200...
$55.00
34 tooth fourth gear as used on all Li150. 90.2mm across...
$55.00
35 tooth fourth gear as used on all Li125, Li150 Special, Li150 Pacemaker, SX150 and GP150. 92.8mm a..
$55.00
36 tooth fourth gear as used on Li125 Special, GP125 and GP200. 95.3mm across...
$55.00
This 5mm e-clip is used to secure the tie bar to the standard gear
selector shaft. If you are usin..
$0.45
This .3mm thick shim goes where the tie bar connects to the gear selector arm that goes into the eng..
$0.45
This .5mm thick shim goes where the tie bar connects to the gear selector arm that goes into the eng..
$0.45
This 1 mm thick shim goes where the tie bar connects to the gear selector arm that goes into the eng..
$0.45
Assembly and disassembly tool for gear selector -BGM PRO 'ball squeezer'- Lambretta LI, LIS, SX, TV ..
$35.00
This is a high quality end plate roller bearing. It fits into the end plate and the gear cluster goe..
$26.00
This a set of gear selector fork pawls that fits on the gear selector fork wishbone. Two come in a s..
$10.00
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
This is a gear shim. It is used to shim up the gearbox. The ideal clearance, measured with a feeler ..
$8.50
Showing 21 to 40 of 129 (7 Pages)